TLIB documentation
Public Member Functions | |
| tlDigitizerPXC200 () | |
| tlDigitizerPXC200 (int width, int height) | |
| tlDigitizerPXC200 (int width, int height, int channel, unsigned short input=TL_SOURCE_AUTO) | |
| virtual | ~tlDigitizerPXC200 () |
| virtual int | open (int index=0) |
| virtual int | open (int width, int height, int index=0) |
| int | open (int width, int height, int index, int channel, unsigned short input=TL_SOURCE_AUTO) |
| virtual int | close () |
| virtual int | setChannel (int channel, unsigned short input) |
| virtual int | setInput (unsigned short input) |
| virtual int | setFrameRate (int fps) |
| virtual int | setSize (int width, int height) |
| virtual int | grab (tlImage *image) |
| virtual int | grab (tlImage *image, tlRect *rect) |
| virtual int | grabQueued (tlImage *image) |
| virtual int | grabQueued (tlImage *image, tlRect *rect) |
| unsigned short | getInput () |
| int | getChannel () |
| int | getWidth () |
| int | getHeight () |
| int | getID () |
| tl_format | getFormat () |
Protected Attributes | |
| bool | isOpen |
| tlDigitizerPXC200::tlDigitizerPXC200 | ( | ) |
| tlDigitizerPXC200::tlDigitizerPXC200 | ( | int | width, | |
| int | height | |||
| ) |
Prepare a digitizer for image acquisition using a given acquisition size. A subsequent call to open() will open the digitizer with the given settings.
| width | acquisition width | |
| height | acquisition height |
| tlDigitizerPXC200::tlDigitizerPXC200 | ( | int | width, | |
| int | height, | |||
| int | channel, | |||
| unsigned short | input = TL_SOURCE_AUTO | |||
| ) |
Prepare a digitizer for image acquisition using a given acquisition size and specific format parameters. A subsequent call to open() will open the digitizer with the given settings.
| width | new acquisition width | |
| height | new acquisition height | |
| channel | channel index on the digitizer | |
| input | input format |
| tlDigitizerPXC200::~tlDigitizerPXC200 | ( | ) | [virtual] |
| int tlDigitizerPXC200::open | ( | int | index = 0 |
) | [virtual] |
Open a digitizer for image acquisition using default settings.
| index | [default=0] the index of the digitizer in the system (for use of multiple digitizers at the same time) |
Implements tlDigitizer.
| int tlDigitizerPXC200::open | ( | int | width, | |
| int | height, | |||
| int | index = 0 | |||
| ) | [virtual] |
Open a digitizer for image acquisition using a given acquisition size.
| width | new acquisition width | |
| height | new acquisition height | |
| index | [default=0] the index of the digitizer in the system (for use of multiple digitizers at the same time) |
Reimplemented from tlDigitizer.
| int tlDigitizerPXC200::open | ( | int | width, | |
| int | height, | |||
| int | index, | |||
| int | channel, | |||
| unsigned short | input = TL_SOURCE_AUTO | |||
| ) |
Open a digitizer for image acquisition using a given acquisition size and specific format parameters.
| width | new acquisition width | |
| height | new acquisition height | |
| index | the index of the digitizer in the system (for use of multiple digitizers at the same time) | |
| channel | channel index on the digitizer | |
| input | input format |
| int tlDigitizerPXC200::close | ( | ) | [virtual] |
Clean up digitizer buffers and close hardware connection. Configuration is retained, so that a call to open() will restore the digitizer state to the last used mode.
Implements tlDigitizer.
| int tlDigitizerPXC200::setChannel | ( | int | channel, | |
| unsigned short | input | |||
| ) | [virtual] |
Set the acquisition channel.
| channel | channel index on the digitizer | |
| input | input format |
Reimplemented from tlDigitizer.
| int tlDigitizerPXC200::setInput | ( | unsigned short | input | ) | [virtual] |
Set the acquisition channel input format.
| input | input format |
Reimplemented from tlDigitizer.
| virtual int tlDigitizerPXC200::setFrameRate | ( | int | fps | ) | [virtual] |
Set the acquisition frame rate.
| fps | desired frames per second |
Reimplemented from tlDigitizer.
| int tlDigitizerPXC200::setSize | ( | int | width, | |
| int | height | |||
| ) | [virtual] |
Set the digitizer acquisition size. All other parameters are left untouched. Depending on the hardware, this call might close and reopen the device, possibly leading to some latency.
| width | new acquisition width | |
| height | new acquisition height |
Reimplemented from tlDigitizer.
| int tlDigitizerPXC200::grab | ( | tlImage * | image | ) | [virtual] |
This call acquires a full image from an image source. The image will have the size and format the source is currently configured for.
| image | [out] a valid image pointer that will receive the image. |
Implements tlDigitizer.
This call acquires a portion of an image from an image source. The image will have the size and format the source is currently configured for, but only the portion defined by the rect argument will contain valid pixel values.
| image | [out] a valid image pointer that will receive the image. | |
| rect | a pointer to the portion of the image to acquire. |
Implements tlDigitizer.
| int tlDigitizerPXC200::grabQueued | ( | tlImage * | image | ) | [virtual] |
This call acquires a full image from an image source. The image will have the size and format the source is currently configured for.
| image | [out] a valid image pointer that will receive the image. |
Implements tlDigitizer.
This call acquires a portion of an image from an image source. The image will have the size and format the source is currently configured for, but only the portion defined by the rect argument will contain valid pixel values.
| image | [out] a valid image pointer that will receive the image. | |
| rect | a pointer to the portion of the image to acquire. |
Implements tlDigitizer.
| tlDigitizer::getInput | ( | ) | [inline, inherited] |
| tlDigitizer::getChannel | ( | ) | [inline, inherited] |
Get currently selected input channel.
| tlSource::getWidth | ( | ) | [inline, inherited] |
Returns the width of the image source. Any image acquired through this tlSource object will have the current width.
| tlSource::getHeight | ( | ) | [inline, inherited] |
Returns the height of the image source. Any image acquired through this tlSource object will have the current height.
| tlSource::getID | ( | ) | [inline, inherited] |
Return a unique identifier for this source. Identifiers are allocated dynamically and are only valid during application run-time.
| tlSource::getFormat | ( | ) | [inline, inherited] |
tlDigitizer::isOpen [protected, inherited] |
Return the current state of the digitizer.